Installation

1ZZ-FE ENGINE MECHANICAL: ENGINE FRONT OIL SEAL:

COMPONENTS













INSTALLATION

1. INSTALL TIMING CHAIN OR BELT COVER OIL SEAL
(a) Apply multi-purpose grease to a new oil seal lip.

NOTE: Keep the lip free of foreign objects.





(b) Using SST and a hammer, tap the new oil seal in until its surface is flush with the timing chain cover edge.
SST: 09223-22010

- Tap the oil seal in a vertical position.
- Wipe off extra grease on the crankshaft.

2. INSTALL CRANKSHAFT PULLEY
(a) Install crankshaft pulley (Installation).
SST: 09960-10010
09962-01000
09963-01000
3. INSTALL ENGINE MOUNTING INSULATOR RH
(a) Install the engine mounting insulator RH (Installation).
4. INSTALL FRONT WHEEL RH
Torque: 103 Nm (1,050 kgf-cm, 76 ft-lbf)
5. CHECK ENGINE OIL LEAKAGE