Parking Brake System: Adjustments

PARKING BRAKE: PARKING BRAKE SYSTEM:

ADJUSTMENT

1. REMOVE REAR WHEEL
2. ADJUST PARKING BRAKE SHOE CLEARANCE
(a) Adjust the parking brake shoe clearance (Testing and Inspection) for drum rear brake type, (Component Tests and General Diagnostics) for disc rear brake type).
3. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft-lbf)
4. INSPECT PARKING BRAKE LEVER TRAVEL
(a) Pull the parking brake lever to the fully applied position, and count the number of clicks.
Parking brake lever travel:
5 to 8 clicks at 196 N (20 kgf, 44.1 lbf)
5. ADJUST PARKING BRAKE LEVER TRAVEL
(a) Remove the rear console box sub-assembly (Removal).





(b) Loosen the lock nut and turn the adjusting nut until the lever travel turns correct.
(c) Tighten the lock nut.
Torque: 5.0 Nm (55 kgf-cm, 44 in-lbf)
(d) Install the rear console box sub-assembly (Installation).