Luggage Speaker

AUDIO / VISUAL: LUGGAGE SPEAKER:

ON-VEHICLE INSPECTION

1. INSPECT NO. 1 SPEAKER WITH BOX

HINT: Remove interior parts so that the No. 1 speaker with box can be seen.

(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the No. 1 speaker with box.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the No. 1 speaker with box.





(c) Resistance check.
(1) Measure the resistance according tot the value(s) in the table below.

NOTE: The speaker should not be removed for checking.

Standard resistance:





If the result is not as specified, replace the No. 1 speaker with box.