Front Side Speaker

AUDIO / VISUAL: FRONT SIDE SPEAKER:

ON-VEHICLE INSPECTION

1. INSPECT FRONT NO. 1 SPEAKER

HINT: Remove interior parts so that the front No. 1 speaker can be seen.

(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the front No. 1 speaker.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the front No. 1 speaker.
(c) Speaker resistance check
(1) Disconnect the front No. 1 speaker connector.
(2) Measure the resistance between the terminals of the speaker.
Standard resistance:
Separate Type Amplifier: 2.3 to 2.9 Ohms
Built-in Type Amplifier: 3.4 to 4.6 Ohms
If the result is not as specified, replace the front No. 1 speaker.
2. INSPECT FRONT NO. 2 SPEAKER

HINT: Remove interior parts so that the front No. 2 speaker can be seen.

(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the front No. 2 speaker.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
If the result is not as specified, replace the front No. 2 speaker.