Removal

AUDIO / VISUAL: REAR SIDE SPEAKER:

COMPONENTS













REMOVAL

1. REMOVE REAR DOOR PULL HANDLE (Disassembly)

2. REMOVE REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) (Disassembly)

3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH (Disassembly)

4. REMOVE REAR SPEAKER





(a) Disconnect the connector.
(b) Using a drill of less than dia 4 mm (0.16 in.), drill out the 3 rivet heads and remove the rear speaker from the rear door panel.
(c) Gently and vertically put the drill to the rivet, and cut the rivet flanges.

NOTICE:
- Prizing the hole with a drill can lead to damage to the rivet hole or breaking the drill.
- Take cafe as the cut rivet is hot.

(d) Even if flange is taken off, continue drilling and push out remaining fragments with the drill.
(e) Using a vacuum cleaner, remove the drilled rivet and their dust from the inside of the rear door panel.