Installation

AUDIO / VISUAL: REAR SIDE SPEAKER:

COMPONENTS







INSTALLATION

1. INSTALL REAR SPEAKER





(a) Using an air riveter or hand riveter, 3 new strike rivets install the rear speaker to the rear door panel.

- Install the new strike rivet in following order shown in the illustration to install the rear speaker.

- Do not prize a riveter, as riveter is damaged, it is not tightened and the mandrel is bent.

- Do not tilt the riveter and disconnect the rivet from the material while handling a riveter, as the materials are not tightened firmly.

- Install the rivet while attaching materials, as they are not tightened firmly.

(b) Connect the connector.
2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
3. INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) (Reassembly)

4. INSTALL REAR DOOR PULL HANDLE