Removal

AUDIO / VISUAL: FRONT SIDE SPEAKER:

COMPONENTS










REMOVAL

1. REMOVE FRONT DOOR PULL HANDLE LH (Disassembly)

2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Window) (Disassembly)

3. REMOVE UPPER FRONT ARMREST BASE PANEL LH (w/o Power Window) (Disassembly)

4. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) (Disassembly)

5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (Disassembly)

6. REMOVE FRONT NO. 1 SPEAKER





(a) Disconnect the connector.
(b) Using a drill of less than dia 4 mm (0.16 in.), drill out the 3 rivet heads and remove the front No. 1 speaker from the front door panel.
(c) Gently and vertically put the drill to the rivet, and cut the rivet flanges.

NOTICE:
- Prizing the hole with a drill can lead to damage to the rivet hole or breaking the drill.
- Take cafe as the cut rivet is hot.

(d) Even if flange is taken off, continue drilling and push out remaining fragments with the drill.
(e) Using a vacuum cleaner, remove the drilled rivet and their dust from the inside of the front door panel.
7. REMOVE FRONT NO. 2 SPEAKER





(a) Disconnect the connector.
(b) Remove the 2 nuts and front No. 2 speaker from the front door panel.