Installation

AUDIO / VISUAL: FRONT SIDE SPEAKER:

COMPONENTS











INSTALLATION

1. INSTALL FRONT NO. 1 SPEAKER





(a) Using an air riveter or hand riveter, 3 new strike rivets to install the front No. 1 speaker to the front door panel.

- Install the new strike rivet in following order shown in the illustration to install the front No. 1 speaker.

- Do not prize a riveter, as riveter is damaged, it is not tightened and the mandrel is bent.

- Do not tilt the riveter and disconnect the rivet from the material while handling a riveter, as the materials are not tightened firmly.

- Install the rivet while attaching materials, as they are not tightened firmly.

(b) Connect the connector.
2. INSTALL FRONT NO. 2 SPEAKER
(a) Install the front No. 2 speaker with the 2 nuts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the connector.
3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
4. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) (Reassembly)

5. INSTALL UPPER FRONT ARMREST BASE PANEL LH (w/o Power Window)
6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Window)
7. INSTALL FRONT DOOR PULL HANDLE LH