Rear Axle Hub Bolt

REAR AXLE HUB BOLT

COMPONENTS:

REMOVAL
1. REMOVE REAR WHEEL
2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH
3. REMOVE REAR DISC





4. REMOVE REAR AXLE LH HUB BOLT
(a) Temporarily install the 2 nuts and 2 washers to the front axle LH hub bolt as shown in the illustration.
(b) Using SST and a screwdriver or an equivalent to hold the front axle, remove the front axle LH hub bolt.
SST 09628-10011

INSTALLATION





1. INSTALL REAR AXLE LH HUB BOLT
(a) Install a washer and nut to a new front axle LH hub bolt as shown in the illustration.
(b) Using a hammer, handle or an equivalent to hold the hub & bearing assembly, install a new rear axle LH hub bolt by tightening the nut.
2. INSTALL REAR DISC
3. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH
4. INSTALL REAR WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft. lbs.)