Front Axle Hub Bolt

FRONT AXLE HUB BOLT

COMPONENTS:

REMOVAL
1. REMOVE FRONT WHEEL
2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY LH
3. REMOVE FRONT DISC





4. REMOVE FRONT AXLE LH HUB BOLT
(a) Temporarily install the 2 nuts and 2 washers to the front axle LH hub bolt as shown in the illustration.
(b) Using SST and a screwdriver or an equivalent to hold the front axle, remove the front axle LH hub bolt.
SST 09628-10011

INSTALLATION





1. INSTALL FRONT AXLE LH HUB BOLT
(a) Install a washer and nut to a new front axle LH hub bolt as shown in the illustration.
(b) Using a screwdriver to hold the front axle, install a new hub bolt by tightening the nut.
2. INSTALL FRONT DISC
3. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY LH
4. INSTALL FRONT WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft. lbs.)