No. 1 Speaker With Box

ON-VEHICLE INSPECTION

1. INSPECT NO. 1 WOOFER BOX SPEAKER

HINT: Remove interior parts so that the No. 1 woofer box speaker can be seen.

a. Check the speaker installation.

OK: The speaker is securely installed.

If the result is not as specified, reinstall the No. 1 woofer box speaker.

b. Visually check the speaker.

OK: The cone paper of the speaker is not torn.

If the result is not as specified, replace the No. 1 woofer box speaker.

c. Speaker resistance check.




1. Disconnect the No. 1 woofer box speaker connector.

2. Measure the resistance between the terminals of the speaker.

NOTE: The speaker should not be removed for checking.




If the result is not as specified, replace the No. 1 woofer box speaker.