Antenna Cable: Service and Repair

Radio Antenna Cord:

Radio Antenna Cord

REMOVAL

HINT:
- COMPONENTS
- Installation is in the reverse order of removal.

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
2. REMOVE CONSOLE UPPER REAR PANEL SUBASSEMBLY
3. REMOVE CONSOLE BOX ASSEMBLY (REAR W/ CONSOLE DOOR)
4. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
6. REMOVE CENTER CLUSTER INTEGRATION PANEL ASSEMBLY
7. REMOVE REAR SEAT ASSEMBLY
8. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH
9. REMOVE FRONT DOOR SCUFF PLATE RH
10. REMOVE QUARTER TRIM PANEL ASSEMBLY FRONT RH
11. REMOVE CENTER PILLAR GARNISH RH
12. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER RH
13. REMOVE QUARTER TRIM PANEL UPPER RH
14. REMOVE ANTENNA CORD SUB-ASSEMBLY

a. Remove the nut and bolt.

b. Disengage the 14 clamps and antenna cord subassembly.

INSTALLATION

1. INSTALL ANTENNA CORD SUB-ASSEMBLY
2. INSTALL QUARTER TRIM PANEL UPPER RH
3. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER RH
4. INSTALL CENTER PILLAR GARNISH RH
5. INSTALL QUARTER TRIM PANEL ASSEMBLY FRONT RH
6. INSTALL FRONT DOOR SCUFF PLATE RH
7. INSTALL REAR SEAT BACK HINGE SUB-ASSEMBLY LH
8. INSTALL REAR SEAT ASSEMBLY
9. INSTALL CENTER CLUSTER INTEGRATION PANEL ASSEMBLY
10. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
11. INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER
12. INSTALL CONSOLE BOX ASSEMBLY (REAR W/ CONSOLE DOOR)
13. INSTALL CONSOLE UPPER REAR PANEL SUBASSEMBLY
14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY