Amplifier Antenna (For Convertible)

Amplifier Antenna (for Convertible):

Amplifier Antenna (for Convertible)

REMOVAL

HINT:
- COMPONENTS
- Installation is in the reverse order of removal.

1. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY
2. REMOVE ANTENNA NUT




a. Remove the antenna nut as shown in the illustration.

NOTE: Wrap the tip of the snap ring pliers with protective tape to prevent damage to the parts.

3. REMOVE ANTENNA ORNAMENT




a. Remove the antenna ornament in the direction shown by the arrow in the illustration.

4. REMOVE AMPLIFIER ANTENNA ASSEMBLY




a. Disconnect the connector.
b. Remove the bolt, disconnect all connectors and remove the amplifier antenna assembly.

INSTALLATION

1. INSTALL AMPLIFIER ANTENNA ASSEMBLY
2. INSTALL ANTENNA ORNAMENT
3. INSTALL ANTENNA NUT
4. INSTALL ROOF ANTENNA POLE SUB-ASSEMBLY