Rear Axle Hub Bolt

REAR AXLE HUB BOLT

COMPONENTS:

REMOVAL
1. REMOVE REAR WHEEL
2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH (DISC REAR BRAKE TYPE
3. REMOVE REAR DISC (DISC REAR BRAKE TYPE)
4. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY (DRUM REAR BRAKE TYPE)





5. REMOVE REAR AXLE LH HUB BOLT
(a) Using SST and a hammer handle or an equivalent, remove the LH hub bolt.
SST 09628-10011

INSTALLATION





1. INSTALL REAR AXLE LH HUB BOLT
(a) Install a washer and nut to a new LH hub bolt as shown in the illustration.
(b) Using a hammer handle or an equivalent to hold the hub & bearing assembly, install the LH hub bolt by tightening the nut.

2. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY (for Rear Drum Brake)
3. INSTALL REAR DISC (DISC REAR RAKE TYPE)
4. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH (DISC REAR BRAKE TYPE)
5. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf/cm, 76 ft. lbs.)