Rear Seat Inner Belt Assembly

Rear Seat Inner Belt Assembly:

Rear Seat Inner Belt Assembly

REMOVAL

1. REMOVE REAR DOOR SCUFF PLATE RH
2. REMOVE REAR DOOR SCUFF PLATE LH
3. REMOVE REAR DOOR OPENING TRIM RH
4. REMOVE REAR DOOR OPENING TRIM LH
5. REMOVE TONNEAU COVER ASSEMBLY
6. REMOVE DECK BOARD NO. 2
7. REMOVE DECK BOARD SUB-ASSEMBLY
8. REMOVE DECK FLOOR BOX REAR
9. REMOVE LUGGAGE COMPARTMENT TRAY
10. REMOVE BACK DOOR WEATHERSTRIP
11. REMOVE DECK TRIM COVER REAR
12. REMOVE REAR SEAT CUSHION ASSEMBLY AND REAR SEATBACK ASSEMBLY
13. REMOVE REAR SEAT INNER BELT ASSEMBLY

INSTALLATION

1. INSTALL REAR SEAT INNER BELT ASSEMBLY
a. Install the floor anchor and rear seat belt assembly inner with the bolt, as shown in the illustration.

Torque: 41.2 N.m (420 kgf.cm, 30 ft.lbf)

NOTE: Do not make the anchor part run onto the protruding part of the floor panel.

2. INSTALL REAR SEAT CUSHION ASSEMBLY AND REAR SEATBACK ASSEMBLY
3. INSTALL DECK TRIM COVER REAR
4. INSTALL BACK DOOR WEATHERSTRIP
5. INSTALL LUGGAGE COMPARTMENT TRAY
6. INSTALL DECK FLOOR BOX REAR
7. INSTALL DECK BOARD SUB-ASSEMBLY
8. INSTALL DECK BOARD NO. 2
9. INSTALL TONNEAU COVER ASSEMBLY
10. INSTALL REAR DOOR OPENING TRIM LH
11. INSTALL REAR DOOR OPENING TRIM RH
12. INSTALL REAR DOOR SCUFF PLATE LH
13. INSTALL REAR DOOR SCUFF PLATE RH