License Plate Lamp: Service and Repair

License Plate Light Assembly:

License Plate Light Assembly:

License Plate Light Assembly

REMOVAL

1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
2. REMOVE BACK DOOR OUTSIDE HANDLE
3. REMOVE BACK DOOR LOCK CYLINDER & KEY SET
4. REMOVE BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE




5. REMOVE LICENSE PLATE LIGHT ASSEMBLY
a. Pull the license plate light assembly to the side of vehicle as shown in the illustration and release the claw.
b. Disconnect the connector and remove the license plate light assembly.

INSTALLATION

1. INSTALL LICENSE PLATE LIGHT ASSEMBLY
2. INSTALL BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE
3. INSTALL BACK DOOR LOCK CYLINDER & KEY SET
4. INSTALL BACK DOOR OUTSIDE HANDLE
5. INSTALL BACK DOOR TRIM BOARD ASSEMBLY