Removal and Replacement

Combination Meter

REMOVAL

1. REMOVE METER HOOD SUB-ASSEMBLY

2. REMOVE COMBINATION METER ASSEMBLY
a. Remove the screw.
b. Disengage the 2 claws as shown in the illustration.

c. Disconnect connector, then remove the combination meter assembly, as shown in the illumination.

INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY
a. Connect the connector, then install the combination meter assembly.

b. Engage the 2 claws as shown in the illustration.
c. Install the screw.

2. INSTALL METER HOOD SUB-ASSEMBLY