Condenser HVAC: Testing and Inspection

ON-VEHICLE INSPECTION

1. INSPECT W/RECEIVER CONDENSER ASSEMBLY

a. If a fin of the w/receiver condenser assembly is dirty, clean it with water and dry it with compressor air.

NOTE: Do not damage the fin of the w/receiver condenser assembly.

b. If a fin of the w/receiver condenser assembly is bent, make it straight using a screwdriver or pliers.

2. INSPECT W/RECEIVER CONDENSER ASSEMBLY FOR LEAKAGE OF REFRIGERANT

a. Using a halogen leak detector, check pipe joints for gas leakage.
b. If gas leakage is detected in a joint, check the torque of the joint.