Removal and Replacement
RADIATORCOMPONENTS:
REMOVAL
1. DRAIN ENGINE COOLANT
2. DISCONNECT RADIATOR HOSE INLET
3. DISCONNECT RADIATOR HOSE OUTLET
4. DISCONNECT OIL COOLER INLET HOSE NO.1 (for Automatic Transaxle)
5. DISCONNECT OIL COOLER OUTLET HOSE NO.1 (for Automatic Transaxle)
6. REMOVE RADIATOR ASSEMBLY
(a) Disconnect the fan motor connector.
(b) Disconnect two clamps for wire-harness from fan-shroud.
(c) Remove the two fan mount bolts.
(d) Remove the fan w/ motor.
INSTALLATION
1. INSTALL RADIATOR ASSEMBLY
(a) Install the fan w/ motor.
(b) Install the two fan mount bolts.
(c) Connect two clamps for wire-harness from fan-shroud.
(d) Connect the fan motor connector.
2. CONNECT OIL COOLER OUTLET HOSE NO.1 (for Automatic Transaxle)
3. CONNECT OIL COOLER INLET HOSE NO.1 (for Automatic Transaxle)
4. CONNECT RADIATOR HOSE OUTLET
5. CONNECT RADIATOR HOSE INLET
6. ADD ENGINE COOLANT
7. INSPECT FOR COOLANT LEAK