Cruise Control Switch: Service and Repair

Cruise Control Main Switch:

CRUISE CONTROL MAIN SWITCH

REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. INSPECT PLACE FRONT WHEELS FACING STRAIGHT AHEAD
3. REMOVE HORN BUTTON ASSEMBLY
4. REMOVE STEERING WHEEL ASSEMBLY

SST 09950-50013 (09951-05010,09952-05010, 09953-05020, 09954-05021)




5. REMOVE CRUISE CONTROL MAIN SWITCH ASSEMBLY
a. Remove the 2 screws and cruise control main switch assembly.

INSTALLATION

1. CENTER SPIRAL CABLE
2. INSTALL STEERING WHEEL ASSEMBLY
3. INSPECT STEERING WHEEL CENTER POINT
4. INSPECT HORN BUTTON ASSEMBLY
5. INSTALL HORN BUTTON ASSEMBLY
6. INSPECT SRS WARNING LIGHT