Parking Brake System: Adjustments
ADJUSTMENT1. REMOVE REAR WHEEL
2. ADJUST PARKING BRAKE SHOE CLEARANCE
(a) Adjust the parking brake shoe clearance.
3. INSTALL REAR WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
4. INSPECT PARKING BRAKE LEVER TRAVEL
(a) Pull the parking brake lever to the fully applied position, and count the number of clicks.
Parking brake lever travel: 5 to 8 clicks at 196 N (20 kgf, 44.1 lbf)
5. ADJUST PARKING BRAKE LEVER TRAVEL
(a) Remove the rear console box sub-assembly.
(b) Loosen the lock nut and turn the adjusting nut until the lever travel turns correct.
(c) Tighten the lock nut.
Torque: 5.0 N*m (55 kgf*cm, 44 in.*lbf)
(d) Install the rear console box sub-assembly.