No. 1 Speaker With Box

ON-VEHICLE INSPECTION

1. INSPECT NO. 1 SPEAKER WITH BOX

HINT: Remove interior parts so that the No. 1 speaker with box can be seen.

a. Check the speaker installation.

OK: The speaker is securely installed.

If the result is not as specified, reinstall the No. 1 speaker with box.

b. Visually check the speaker.

OK: The cone paper of the speaker is not torn.

If the result is not as specified, replace the No. 1 speaker with box.




c. Resistance check.




1. Measure the resistance according tot the value(s) in the table.

NOTE: The speaker should not be removed for checking.

If the result is not as specified, replace the No. 1 speaker with box.