Radio/Stereo: Service and Repair

Radio Receiver:

Radio Receiver

REMOVAL

1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY




2. REMOVE RADIO RECEIVER ASSEMBLY
a. Remove the 4 screws.
b. Disconnect the clamp from the No. 2 radio bracket.
c. Disconnect the connectors, then remove the radio receiver assembly.




3. REMOVE NO. 1 RADIO BRACKET
a. Remove the 4 screws and No. 1 radio bracket.




4. REMOVE NO. 2 RADIO BRACKET
a. Remove the 4 screws and No. 2 radio bracket.

5. REMOVE RADIO RECEIVER

INSTALLATION

1. INSTALL RADIO RECEIVER
2. INSTALL NO. 2 RADIO BRACKET
3. INSTALL NO. 1 RADIO BRACKET
4. INSTALL RADIO RECEIVER ASSEMBLY
5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY