Antenna Amplifier: Service and Repair

Amplifier Antenna:

Amplifier Antenna

REMOVAL

1. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY
2. REMOVE ROOF HEADLINING ASSEMBLY

HINT: Refer to the instructions for removal of the roof headlining assembly.




3. REMOVE AMPLIFIER ANTENNA ASSEMBLY
a. Remove the 4 clamps and antenna nut.




b. Release the 2 fitting claws, remove the amplifier antenna assembly.

INSTALLATION




1. INSTALL AMPLIFIER ANTENNA ASSEMBLY
a. Set the amplifier antenna assembly to the hole on the roof, and place the antenna cord on the cutout on the antenna nut.




b. Install the amplifier antenna assembly with the antenna nut.

Torque: 4.5 N.m (46 kgf.cm, 40 in.lbf)

c. Install the 4 clamps.

2. INSTALL ROOF HEADLINING ASSEMBLY

HINT: Refer to the installation procedures of the roof headlining assembly.

3. INSTALL ROOF ANTENNA POLE SUB-ASSEMBLY
4. INSTALL REAR SEAT CUSHION ASSEMBLY AND REAR SEATBACK ASSEMBLY