Crankshaft, Engine

Thrust clearance
STD 0.04 - 0.24 mm (0.0016 - 0.0095 inch)
Maximum 0.30 mm (0.0118 inch)
Thrust washer thickness 1.930 - 1.980 mm (0.0760 - 0.0780 inch)
Circle runout
Maximum 0.06 mm (0.0024 inch)
main journal oil clearance
STD
No.1 and No.4 0.016 - 0.036 mm (0.0006 - 0.0014 inch)
No.2 and No.3 0.028 - 0.048 mm (0.0011 - 0.0019 inch)
Maximum
No.1 and No.4 0.05 mm (0.0020 inch)
No.2 and No.3 0.06 mm (0.0024 inch)
Main journal diameter 60.988 - 61.000 mm (2.4011 - 2.4016 inch)
Main journal taper and out-of-round
maximum 0.02 mm (0.0008 inch)