Front

REMOVAL
1. Remove left and right front wheels.
Torque: 103 Nm (76 ft. lbs.)





2. Remove left and right stabilizer bar links.
Remove the 4 nuts and 2 links.
Torque: 39 Nm (29 ft. lbs.)

HINT: If the ball joint turns together with the nut, use a 5 mm hexagon wrench to hold the stud.





3. Remove left and right brackets and bushings.
Remove the 4 bolts, 2 brackets and bushings.
Torque: 19 Nm (14 ft. lbs.)

HINT: At time of installation, install the bushing to the inside of the bushing on the stabilizer bar.

4. Remove stabilizer bar.
Remove the stabilizer bar from the left hand side.

NOTICE: Be careful not to damage the pressure feed tube.

INSTALLATION
Installation is in the reverse order of removal.