Removal and Installation

COMPONENTS

REMOVAL
1. REMOVE THESE PARTS:
a. Front door scuff plate RH
b. Cowl side trim RH
c. No. 2 under cover
d. Lower No. 2 finish panel
e. Glove compartment door
f. Glove compartment
g. ECM




2. REMOVE BLOWER UNIT
a. Remove the 2 connector bracket set screws.
b. Disconnect the connectors.
c. Remove the 2 nuts, 2 bolts and blower unit.

INSTALLATION
Installation is in the reverse order of removal.