Body - Mudguard Installation Procedure: Overview
ACCESSORYAX013-97
November 7, 1997
Title:
MUDGUARD INSTALLATION PROCEDURE
Models:
'98 Avalon
Introduction
A full mudguard kit is now available for installation on the 1998 Avalon. Thoroughly clean all attachment areas and inspect accessory kit contents then follow the procedure outlined in this bulletin.
Affected Vehicles
1998 model year Avalon.
Parts Information
PART NUMBER QTY PART NAME
PT353-07980 1 Mudguard Kit for 1998 Avalon
^ The Mudguard Kit (P/N PT353-07980) contains 4 mudguards and all of the following parts:
PART NUMBER QTY PART NAME
90164-60025 10 Screw, MS x 22, Slotted Pan HD
90467-09093 2 Clip, 8.0 x 27.0 Lg.
90189-06006 6 Screw Grommet, 10.0x10.0 Lg.
90189-06157 4 Screw Grommet, 5.0 x 23.0 Lg.
NOTE:
Mudguard kit contains all hardware necessary for complete mudguard installation. Some hardware already exists on the vehicle and may be reused if undamaged after removal. If existing hardware is damaged, appropriate hardware from kit must be used.
Mudguard replacement part numbers are the same as factory Installation. See your Toyota Parts Catalog for part number information.
Recommanded Tools & Materials
TOOLS & MATERIALS
Phillips Screwdriver or Ratchet with # 2 Phillips Tip
50/50 Isopropyl alcohol/water mixture
clean lint-free cloth
Warranty Information