Input Shaft: Application and ID

Input shaft:
Roller bearing journal diameter:
Minimum 24.970 mm (0.9831 in.)
3rd gear journal diameter
Minimum 30.970 mm (1.2193 in.)
4th gear journal diameter
Minimum 28.970 mm (1.1405 in.)
5th gear journal diameter
Minimum 24.870 (0.9791)
Run out:
Maximum 0.05 mm (0.0020 in.)
Drive In Depth:
Input shaft front oil seal 15.8 +/- 0.2 mm (0.622 +/- 0.008 in.)