Service Specifications

SERVICE SPECIFICATIONS
Starting Torque:
With Spring Tension Gauge 1.2 - 2.0 kg (2.6 - 4.4 lb)
With Torque Gauge
Hexagon Nut Side:
New Bearing 0.6 - 1.0 Nm (6 - 10 kgf-cm, 5.2 - 8.7 inch lbs.)
Reused Bearing 0.3 - 0.5 Nm (3 - 5 kgf-cm, 2.6 - 4.3 inch lbs.)
Planetary Sun Gear Bushing Inside Diameter:
Standard 29.800 - 29.825 mm (1.1732 - 1.1742 inch)
Maximum 29.870 mm (1.1760 inch)
Underdrive Planetary Pinion Gear Thrust Clearance:
Maximum 0.5 mm (0.020 inch)
Height (Measure The Distance Between The Tip Of The Counter Shaft And Bolt Seat Of The Clutch Support)
33.3 - 35.5 mm (1.311 - 1.398 inch)
End Play 0.23 - 0.89 mm (0.0089 - 0.035 inch)

TORQUE SPECIFICATIONS
Countershaft x Driven Gear 157 Nm (1,600 kgf-cm, 116 ft. lbs.)