Starter Relay: Testing and Inspection

STARTER RELAY (Marking: "ST") INSPECTION


1. REMOVE RELAY BOX COVER







2. REMOVE STARTER RELAY


3. INSPECT STARTER RELAY







A. Inspect relay continuity
a. Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity. replace the relay.
b. Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.







B. Inspect relay operation
a. Apply battery voltage across terminals 1 and 2.
b. Using an ohmmeter, check that there is continuity between terminals 3 and 5.

If there is no continuity, replace the relay.

4. REINSTALL STARTER RELAY


5. REINSTALL RELAY BOX COVER