Crankshaft Main Bearing

SERVICE SPECIFICATIONS
Main Bearing Center Wall Thickness (Reference)
Mark 1 1.997 - 2.000 mm (0.0786 - 0.0787 inch)
Mark 2 2.001 - 2.003 mm (0.0788 - 0.0789 inch)
Mark 3 2.004 - 2.006 mm (0.0789 - 0.0790 inch)
Mark 4 2.007 - 2.009 mm (0.0790 - 0.0791 inch)
Mark 5 2.010 - 2.012 mm (0.0791 - 0.0792 inch)
U/S 0.25 2.118 - 2.124 mm (0.0834 - 0.0836 inch)






TIGHTENING SPECIFICATIONS
Crankshaft Bearing Cap to Cylinder Block 58 Nm (580 kg.cm, 42 ft. lbs.)