Ignition Switch Circuit

IGNITION SWITCH CIRCUIT


CIRCUIT DESCRIPTION
When the ignition switch is turned to the ACC position, battery positive voltage is applied to the terminal ACC of the ECU. Also, if the ignition switch is turned to the ON position, battery positive voltage is applied to the terminal ACC of the ECU. When the battery positive voltage is applied to the terminal ACC of the ECU while the theft deterrent system is activated, the warning stops.

Ignition Switch Circuit (With Theft Deterrent System):

WIRING DIAGRAM

Inspection Procedure / Ignition Switch Circuit (1 Of 2):

Inspection Procedure / Ignition Switch Circuit (2 Of 2):

INSPECTION PROCEDURE