P0106

DTC P0106 Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance Problem





CIRCUIT DESCRIPTION
By a built-in sensor unit, the manifold absolute pressure sensor detects the intake manifold pressure as a voltage. The ECM then determines the basic injection duration and basic injection advance angle based on this voltage. Since the manifold absolute pressure sensor does not use the atmospheric pressure as a criterion, but senses the absolute pressure inside the intake manifold (the pressure in proportion to the present absolute vacuum 0), it is not influenced by fluctuations in the atmospheric pressure due to high altitude and other factors. This permits it to control the air-fuel ratio at the proper lever under all conditions.





DETECTING CONDITION





WIRING DIAGRAM

Step 1:

Step 2:

INSPECTION PROCEDURE

HINT: If DTC "P0105" (Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction) and "P0106" (Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance Problem) are output simultaneously, manifold absolute pressure sensor circuit may be open.
Perform troubleshooting of DTC P0105 first.