Canister Purge Solenoid: Service and Repair

COMPONENTS FOR REMOVAL AND INSTALLATION

CANISTER PURGE SOLENOID (VSV FOR EVAP) REMOVAL

1. REMOVE V-BANK COVER AND EMISSION CONTROL VALVE SET AND HIGH-TENSION CORD COVER
2. REMOVE VSV
(a) Disconnect the 2 EVAP hoses from the VSV.
(b) Remove the screw and VSV.

CANISTER PURGE SOLENOID (VSV FOR EVAP) INSTALLATION

1. REINSTALL VSV
(a) Install the VSV with the screw.
(b) Connect the 2 EVAP hoses to the VSV.
2. REINSTALL EMISSION CONTROL VALVE SET
3. REINSTALL HIGH-TENSION CORD COVER
4. REINSTALL V-BANK COVER