Disassembly

DISASSEMBLE EXHAUST CAMSHAFTS





1. Mount the hexagonal wrench head portion of the camshaft in a vise.

CAUTION: Be careful not to damage the camshaft.





2. Using Special Service Tool (SST) Variable Pin Wrench Set # 09960-10010 (Variable Pin Wrench Arm Assembly # 09962-01000, and Pin 5 # 09963- 00500) or equivalents, turn the sub-gear counterclockwise, and remove the service bolt.





3. Using snap ring pliers, remove the snap ring.
4. Remove these parts:
(1) Wave washer.
(2) Camshaft sub-gear.
(3) Camshaft gear spring.

NOTE: Arrange the camshaft sub-gears and gear spring (RH and LH side).