Front Wiper and Washer

With the Ignition SW turned ON, current flows to TERMINAL 18 of the Front Wiper and Washer SW, TERMINAL 2 of the Washer Motor and TERMINAL 6 of the Front Wiper Motor through the WIPER fuse.

1. LOW SPEED POSITION
With Wiper SW turned to LOW position, the current flows from TERMINAL 18 of the Front Wiper and Washer SW --> TERMINAL 7 --> TERMINAL 3 of the Front Wiper Motor --> TERMINAL 1 --> GROUND, causing the Wiper Motor to run at low speed.

2. HIGH SPEED POSITION
With the Wiper SW turned to HIGH position, the current flows from TERMINAL 18 of the Front Wiper and Washer SW --> TERMINAL 13 --> TERMINAL 2 of the Front Wiper Motor --> TERMINAL 1 --> GROUND, and causes the Wiper Motor to run at high speed.

3. INT POSITION
With Wiper SW turned to INT position, the Relay operates and the current which is connected by the relay function flows from TERMINAL 18 of the Front Wiper and Washer SW --> TERMINAL 16 --> GROUND. This flow of current operates the intermittent circuit, and current flows from TERMINAL 18 of the Front Wiper and Washer SW --> TERMINAL 7 --> TERMINAL 3 of the Front Wiper Motor --> TERMINAL 1 --> GROUND and functions.

The Intermittent operation is controlled by a condenser's charged and discharged function installed in the relay, and the intermittent time is controlled by a time control SW to charge the charging time of the condenser.

4. MIST POSITION
With the Wiper SW turned to MIST position, the current flows from TERMINAL 18 of the Front Wiper and Washer SW --> TERMINAL 7 --> TERMINAL 3 of the Front Wiper Motor --> TERMINAL 1 --> to GROUND and causes the Wiper Motor to run at low speed.

5. WASHER CONTINUOUS OPERATION
With Washer SW turned to ON, current flows from TERMINAL 2 of the Washer Motor --> TERMINAL 1 --> TERMINAL 8 of the Front Wiper and Washer SW --> TERMINAL 16 --> to GROUND and causes the Washer Motor to run, and the Window Washer is jet. This causes the current to flow to Washer continuous operation circuit in TERMINAL 18 of the Front Wiper and Washer SW --> TERMINAL 7 --> TERMINAL 3 of the Front Wiper Motor --> TERMINAL 1 --> to GROUND, and functions.