Vehicle Speed Sensor O-Ring Replacement

REPLACE VEHICLE SPEED SENSOR O-RING
a. Remove the transmission.
b. Remove the set bolt and driven gear.
c. Remove the O-ring from the driven gear.
d. Install a new O-ring to the driven gear.
e. Apply sealant to the bolt threads.
Sealant: Part No. 08833-00080. THREE BOND 1344, LOCTITE 242 or equivalent
f. Install the driven gear with the bolt.

Torque: 11 N.m (110 kgf.cm, 8 ft.lbf)