Service Hints

C2 CRUISE CONTROL ACTUATOR
1-3: Approx. 2 K Ohms
5-4: Approx. 38 Ohms

C13 CRUISE CONTROL SW MAIN [COMB. SW]
15-20: Continuous with Main SW ON
20-17: Approx. 418 Ohms with cancel SW ON
Approx. 68 Ohms with Resume/Accel SW ON
Approx. 198 Ohms with Set/Coast SW ON

C16 CRUISE CONTROL ECU
14-Ground: Approx. 12 Volts with Ignition SW at ON position
1, 15-Ground: Always approx. 12 Volts
20-Ground: 4 pulse with 1 rotation of rotor shaft
18-Ground: Approx. 418 Ohms with cancel SW ON in control SW
Approx. 68 Ohms with Resume/Accel SW ON in control SW
Approx. 198 Ohms with Set/Coast SW ON in control SW
13-Ground: Always continuous
2-Ground: Continuous with Shift Lever at N position (A/T) or Clutch Pedal depressed (M/T)