With Scan Tool

DTC CHECK USING TOYOTA HAND-HELD TESTER







1. Turn the ignition switch OFF

2. Using SST, connect terminals Ts and E1 of DLC1.
SST 09843-18020

3. Start the engine.

4. Check that the ABS warning light blinks.

HINT: If the ABS warning light does not blink, inspect the ABS warning light circuit.

5. Drive the vehicle faster than 45km/h (28 mph) for several seconds.

6. Stop the vehicle.

7. Hook up the TOYOTA hand-held tester to the DLC2.

8. Read the DTC by following the prompts on the tester screen.

Please refer to the TOYOTA hand-held tester operator's manual for further details.

DTC Of Speed Sensor Check Function: