Disassembly and Reassembly

DISASSEMBLY
1. REMOVE HEATER CONTROL KNOBS
2. REMOVE HEATER CONTROL NAME PLATE
Using a screwdriver, release the 4 claws and remove the plate.

HINT: Tape the screwdriver tip before use.

3. PULL OUT 2 BULBS
4. REMOVE BLOWER SPEED CONTROL SWITCH
a. Disconnect the 2 bulb holders.
b. Remove the 2 screws and switch.

5. REMOVE MODE CONTROL SWITCH
Remove the 2 screws and switch.

REASSEMBLY
Reassembly is in the reverse order of disassembly.