Service Hints
C 3 CRUISE CONTROL ACTUATOR1-3: Approx. 2 K Ohms
5-4: Approx. 38 Ohms
C11 CRUISE CONTROL SW [COMB. SW]
5-3: Continuity with Main SW ON
4-3: Approx. 418 Ohms with cancel SW ON
Approx. 68 Ohms with Resume/Accel SW ON
Approx. 198 Ohms with Set/Coast SW ON
C13 CRUISE CONTROL ECU
14-Ground: Approx. 12 Volts with Ignition SW at ON position
1, 15-Ground: Always approx. 12 Volts
20-Ground: 4 pulse with 1 rotation of rotor shaft
18-Ground: Approx. 418 Ohms with cancel SW ON in control SW
Approx. 198 Ohms with Set/Coast SW ON in control SW
Approx. 68 Ohms with Resume/Accel SW ON in control SW
13-Ground: Always continuity