Up to July 95

With the Ignition SW turned ON, the current flows to TERMINAL 18 of the Wiper and Washer SW, TERMINAL 2 of the Washer Motor and TERMINAL 6 of the Front Wiper Motor Through the Wiper fuse

1. LOW SPEED POSITION
With Wiper SW turned to Low position, the current flows from TERMINAL 18 of the Wiper and Washer SW --> TERMINAL 7 --> TERMINAL 3 of the Front Wiper Motor --> TERMINAL 1 --> to Ground and cause to the Wiper Motor to run at low speed

2. HIGH SPEED POSITION
With Wiper SW turned to High position, the current flows from TERMINAL 18 of the Wiper and Washer SW -->TERMINAL 7 --> TERMINAL 13 --> TERMINAL 2 of the Front Wiper Motor --> TERMINAL --> to Ground and cause to the Wiper Motor to Run at High speed.

3. INT POSITION
With Wiper SW turned to INT position, the relay operates and the current which is connected by Relay function flows from TERMINAL 18 of the Wiper and Washer SW --> TERMINAL 16 --> to Ground. This flows of current operates the Intermittent Circuit and the current flows from TERMINAL 18 of the Wiper and Washer SW --> TERMINAL 7 --> TERMINAL 3 of the Front Wiper Motor --> TERMINAL 1 --> TO Ground and functions.
The Intermittent operation is controlled by a time control SW to charge the charge time of the condenser

4. MIST POSITION
With Wiper SW turned to MIST position, the current flows from TERMINAL 18 of the Wiper and Washer SW --> TERMINAL 7 --> TERMINAL 3 of the Front Wiper Motor --> TERMINAL 1 --> to Ground and causes the Wiper Motor to run at Low speed.

5. WASHER CONTINUOUS OPERATION
With Washer SW turned to ON, the current flows from TERMINAL 2of the Washer Motor --> TERMINAL 1 --> TERMINAL 8 of the Wiper and Washer SW --> TERMINAL 16 --> to Ground and causes to the Washer Motor to run, and Window Washer is jet. This causes the current to flow Washer continuous operation circuit in TERMINAL 18 of the Wiper and Washer SW --> TERMINAL 7 --> TERMINAL 3 of the Front Wiper Motor --> TERMINAL 1 --> to Ground and function.