TC Terminal Circuit

Tc Terminal Circuit

CIRCUIT DESCRIPTION
By connecting terminals Tc and E1 of the DLC1 or DLC2, the center airbag sensor assembly is set in the diagnostic trouble code output mode. The diagnostic trouble codes are displayed by the blinking of the SRS warning light.





WIRING DIAGRAM

Step 1:

Step 2:

Step 3:

Step 4:

HINT: If the diagnostic trouble code is not displayed, do the following troubleshooting

Step 1:

HINT: If the diagnostic trouble code is displayed without a DTC check procedure, perform the following troubleshooting.

INSPECTION PROCEDURES [P] Preparation [C] Check