Up to July 95

With the Ignition SW turned ON, the current flows to TERMINAL 7 of the integration relay through Gauge fuse. Voltage is applied at all times to TERMINAL-A 5 OF the Integration Relay through the Taillight Relay Coil, and to TERMINAL-A 6 through the Headlight Relay Coil

1. NORMAL LIGHTING OPERATION
(Turn Taillight ON)
With light control SW turned to Tail position, a signal is input into TERMINAL-A 4 of the Integration Relay. Due to this signal, the current flowing to TERMINAL-A 5 of the Relay flows to TERMINAL-A 4 --> TERMINAL 2 of the light control SW --> TERMINAL 11 --> Ground, and Taillight to turn ON

(Turn Headlight ON)
With light control SW turned to Head position, A signal is Input into TERMINALS-A 4 and A-7 of the Integration Relay. Due to this Signal, the Current flowing to TERMINAL-A 6 of the Relay flows to TERMINAL-7 --> TERMINAL 13 of the light control SW --> TERMINAL 11 --> to Ground in the Headlight circuit, and causes Taillight and Headlight Relay to turn the light ON. The Taillight circuit is same as above

2. LIGHT AUTO TURN OFF OPERATION
With light ON and Ignition SW turned OFF (Input signal goes to TERMINAL 7 OF THE Relay), when the Driver's Door is opened (Input signal goes to TERMINAL 6 of the Relay), the Relay operates and the current is cut OFF which flows from TERMINAL-A 5 of the Relay of TERMINAL-A 4 in Taillight circuit and from TERMINAL-A 6 to TERMINAL-A 7 in Headlight circuit.

As a result, all lights are OFF Automatically.