Component Tests and General Diagnostics

CAMSHAFT POSITION SENSORS (G1 and G2)



1. DISCONNECT CAMSHAFT POSITION SENSOR CONNECTORS.

2. INSPECT CAMSHAFT POSITION SENSOR RESISTANCE.



Using an ohmmeter, measure the resistance between terminals.

NOTE: "Cold" and "Hot" in the following specifications express the temperature of the sensors themselves.

COLD: {from -10°C (14°F) to 50°C (122°F)}
Nippondenso:....... 835 - 1,400 Ohms
Asian:....... 985 - 1,600 Ohms

HOT: {from 50°C (122°F) to 100°C (212°F)}
Nippondenso:......1,060 - 1,645 Ohms
Asian:......1,265 - 1,890 Ohms

^ If the resistance is not as specified, replace the camshaft position sensor.

3. RECONNECT CAMSHAFT POSITION SENSOR CONNECTORS.