Vehicle Speed Sensor: Service and Repair

NO.1 VEHICLE SPEED SENSOR REPLACEMENT



1. DISCONNECT NO.1 VEHICLE SPEED SENSOR CONNECTOR.
2. REMOVE NO.1 VEHICLE SPEED SENSOR ASSEMBLY.
- Remove the bolt and No.1 vehicle speed sensor assembly.
- Remove the speedometer driven gear from the No.1 speed sensor.
- Remove the 0-ring from the No.1 vehicle speed sensor.
3. INSTALL NO.1 VEHICLE SPEED SENSOR ASSEMBLY.
- Coat a new 0-ring with A/T fluid and install it to the No.1 vehicle speed sensor.
- Install the speedometer driven gear to the No.1 vehicle speed sensor.
- Install the No.1 vehicle speed sensor to the extension housing and torque the bolt.

Torque: 16 Nm (160 kg.cm, 12 ft.lb)

4. CONNECT NO. 1 VEHICLE SPEED SENSOR CONNECTOR.


NO.2 VEHICLE SPEED SENSOR REPLACEMENT



1. DISCONNECT NO.2 VEHICLE SPEED SENSOR CONNECTOR.
2. REMOVE NO.2 VEHICLE SPEED SENSOR.
- Remove the bolt and No.2 vehicle speed sensor.
- Remove the 0-ring.
3. INSTALL NO.2 VEHICLE SPEED SENSOR.
- Coat a new 0-ring with A/T fluid and install it to the No.2 vehicle speed sensor.
- Install the No.2 vehicle speed sensor to the extension housing and torque the bolt.

Torque: 5.4 Nm (55 kg.cm, 48 in.lb)

4. CONNECT NO.2 VEHICLE SPEED SENSOR CONNECTOR.