Description

DTC 22 Engine Coolant Temp. Sensor Circuit

CIRCUIT DESCRIPTION
The engine coolant temperature sensor senses the coolant temperature. A thermistor built in the sensor changes its resistance value according to the coolant temperature. The lower the coolant temperature, the greater the thermistor resistance value, and the higher the coolant temperature, the lower the thermistor resistance value.
The engine coolant temperature sensor is connected to the engine control module (ECM). The 5 volt power source voltage in the ECM is applied to the engine coolant temperature sensor from terminal THW via a resistor R. That is, the resistor R and the engine coolant temperature sensor are connected in series. When the resistance value of the engine coolant temperature sensor changes in accordance with changes in the coolant temperature, the potential at terminal THW also changes. Based on this signal, the ECM increases the fuel injection volume to improve driveability during cold engine operation. If the ECM records the DTC 22, it operates the fail safe function in which the engine coolant temperature is assumed to be 80°C (176°F).

DIAGNOSTIC TROUBLE CODE DETECTING CONDITION
- Open or short in engine coolant temperature sensor circuit for 0.5 seconds or more.

TROUBLE AREA
- Open or short in engine coolant temperature sensor circuit.
- Engine coolant temperature sensor.
- Engine control module.