Code 13 - G, NE Signal Circuit No. 2

Data Trouble Code No.13 - No G or NE Signal

Detecting Condition
(A) No NE signal to ECM for 0.1 seconds or more at 1,000 rpm or more.
or
(B) NE signal does not pulse 12 times to ECM during the interval between G1 and G2 pulses.
or
(C) Deviation in G (G1, G2) and NE signal continues for 3 seconds during idling (throttle fully closed) after engine is warmed up.

Trouble Area
(A) Open or short in crankshaft position sensor circuit.
^ Crankshaft position sensor.
^ Engine Control Module.
or
(B) Open or short in crankshaft position sensor circuit.
^ Mechanical system malfunction (skipping teeth on timing belt, belt stretched)
^ Crankshaft position sensor.
or
(C) Mechanical system malfunction (skipping teeth on timing belt, belt stretched)
^ Camshaft position sensor (No.1 or No.2).
^ ECM.

Malfunction Indicator Lamp
(A) Normal Mode On
Test Mode N.A.
or
(B) Normal Mode N.A.
Test Mode On
or
(C) Normal Mode On
Test Mode N.A.

Recorded in memory?
Yes