With S53 Transaxle/2WD

1. REMOVE CONTROL SHIFT LEVER, DUST BOOT AND CONTROL SHAFT COVER
a. Remove the nut and washer.
b. Remove the lever lock pin.
c. Remove the control shift lever.
d. Remove the dust boot.
e. Remove the control shaft cover.




2. REMOVE REVERSE RESTRICT PIN HOLDER AND NO.2 SHIFT INNER LEVER
a. Using a screwdriver, pry out the E-ring.




b. Remove the reverse restrict pin holder, spring and No.2 shift inner lever.




3. REMOVE SHIFT FORK LOCK PLATE, NO.1 SHIFT INNER LEVER AND SHIFT INTERLOCK PLATE
a. Using a pin punch and hammer, drive out the slotted spring pin.




b. Remove the shift fork lock plate, No.1 shift inner lever, spring and shift interlock plate.




4. REMOVE E-RING FROM SELECT LEVER SHAFT
Using a screwdriver, pry out the E-ring.